Interior Finishing: Strait-Flex
Perma-Patch
multi-purpose drywall patch
Perma-Patch quickly repairs doorknob damage to drywall and is ideal for mis-cut or relocation of receptacles, ceiling and can lights.
Strait-Flex Wide-Flex
FINISHES INSIDE AND outside 90° AND OFF-ANGLE CORNERS
Strait-Flex Wide-Flex is a mud-on, paper-faced composite corner bead that adjusts to any angle to create perfect inside and outside 90° and off-angle corners.
Strait-Flex® Edge-Tape
Designed to replace tear-off bead
Edge-Tape creates clean, straight edges, is twice as fast, and uses half the compound compared to tear-off bead.
Strait-Flex® Mid-Flex
FINISHES INSIDE AND OUTSIDE 90° AND OFF-ANGLE CORNERS
Strait-Flex Mid-Flex is a muddable, paper-faced composite, flexible corner bead that adjusts to any angle to create perfect inside and outside 90° and off-angle corners.
Strait-Flex® Original
FINISHES INSIDE AND OUTSIDE 90° AND OFF-ANGLE CORNERS
Strait-Flex Original is a versatile, multi-purpose drywall corner bead available in 100 ft. rolls.
Can-Patch (Commercial)
Can light patch (commercial)
Pre-cut 6-1/4" hole fits standard commercial ceiling lights and can light receptacles.
Can-Patch (Residential)
Can light patch (residential)
Pre-cut 6-1/4" hole fits standard residential ceiling lights and can light receptacles.
Head-Patch
sprinkler head patch, standard and flush style
Pre-cut to fit standard sprinkler head safety caps.
Outlet-Patch
electrical outlet patch
Outlet-Patch repairs and reinforces mis-cuts or damaged areas around receptacle boxes.
Roll-Patches
continuous patch material
Continuous roll patch width allows material to be cut to any length.
Strait-Flex® Ammo-Flex
Designed for bazooka® applications
Loads into any Bazooka® for fast applications of intricate off-angles or inside 90º corners.
Strait-Flex® Arch-Flex
DESIGNED FOR COMPOUND ARCHES AND DOUBLE CURVE APPLICATIONS
Arch-Flex is designed for compound arches and double curve applications, including arched windows and doors, ceilings, soffits, staircases, barrel vaults, groin cathedrals; even…
Strait-Flex® Arch-Stick
composite arched corner BEAD
Designed for outside 90° arched corners, eliminating flat spots.
Strait-Flex® Big-Stick
Designed for high traffic, outside 90° corners
The easiest corner bead on the market to install and repair.
Strait-Flex® Crack-Tape
Repairs persistant cracks in corners and on flat surfaces
Tested to be two times stronger than paper or mesh tapes.
Strait-Flex® Gold
High-Performance Drywall Corner Bead
Strait-Flex Gold is a mud-on, paper-faced composite corner bead that adjusts to any angle to create perfect inside and outside 90° and off-angle corners.
Strait-Flex® IS-300
DESIGNED FOR INSIDE 90° CORNERS, WHERE LARGE FRAMING IRREGULARITIES NEED TO BE OVERCOME
IS-300 is designed for 90-degree inside corners where speed and strength are needed and/or where large framing irregularities need to be overcome.
Strait-Flex® L-Bead
Designed to finish edges of drywall
Ideal for window returns, sky lights and wall edges.
Strait-Flex® Medium
Finishes INSIDE 90° AND OFF-ANGLE CORNERS
Strait-Flex Medium is a high-performance drywall corner bead.
Strait-Flex® OS-300
DESIGNED FOR SQUARE, LOW-FILL OUTSIDE 90° CORNERS
Diamond-punched paper edging allows for easier feathering, faster drying, and high bonding strength, which assures even lay-down of the paper, providing maximum adhesion without rippling or…
Strait-Flex® OS-400
DESIGNED for outside 90° corners where large voids and irregularities occur
Diamond-punched paper edging allows for easier feathering, faster drying, and the highest bonding strength.
Strait-Flex® Perfect-90°™
Finishes inside 90° and off-angle corners
Perfect-90º™ ensures a clean, sharp corner without the risk of damage from a taping knife.
Strait-Flex® Tile-Tape®
Designed for tile, marble and granite and water and mold resistant
Produces straight, strong, and water-proof inside, outside and off-angle corners.
Strait-Flex® Tuff-Tape
Designed for strength and speed and as a paper tape replacement
Used in areas where humidity causes paper tape to fail.
Strait-Flex® Uno-Bead 222
DESIGNED FOR replacing or repairing metal corner bead
Uno-Bead222 is Ideal for drywall, thin-coat plaster applications.
Strait-Flex® Wet-Flex
Designed AS A WATER-ACTIVATED OUTSIDE 90° AND OUTSIDE OFF-ANGLE CORNER BEAD ON A ROLL
Water-activated adhesive on inside of roll.
Strait-Flex® Wet-Stick
composite water-activated adhesive
Designed for outside 90° corners without the need of compound or fasteners.
Strait-Flex® X-Crack
Framing Alignment
Eliminates ceiling cracks and straightens uneven framing.
Strait-Flex® Butt-Tape
